Hose Assemblies- Point-Of-Entry (POU)
H2O Degree POU Hose Assembly

Hose Assemblies- Point-Of-Entry (POU) Overview

H2O Degree offers a variety of Hose Assemblies for Point-Of-Entry (POU) water submetering. This versatile line of products include the PLM10100 flow sensor. The hose assemblies simplify the installation of water submeters, reducing cost and time. In addition, all hose assemblies are factory pressure tested, reducing the potential for leaks.


The Point-of-Entry hose assemblies can be selected based on the specific plumbing of each project and are offered for use on toilets, showers, tubs, kitchen sinks, bathroom sinks and washing machines.

Hose Assemblies – Point-Of-Use

Features

  • The H2O Degree hose assemblies include the PLM10100 flow sensor.
  • Hose assemblies are available in multiple configurations based on new or existing plumbing.
  • Shark Bite quick connectors are included where applicable for ease of installation.
  • All assemblies are factory pressure tested for leak protection.
  • Typical applications include:
    – Toilets
    – Showers
    – Kitchen Sinks
    – Bathroom Sinks
    – Washing Machines
  • Approvals:
    – NSF-61 & NSF-14 approved plumbing fittings
    – MA Board of Plumbers Approved Cert. # P1-0918-94
  • Five year warranty.

Ordering Information

Model
PL1002
PL1003
PL1003-D
PL1003-T
PL1003-DSB
PL1004
PL1004-C
PL1006
PL1007
PL1007-SB-12
PL1007-SB-B-E
PL1007-SB-F-E
PL1007-X
PL1017
PL1021

 

Description
Hose (braided) assembly-Toilet 3/8” compression inlet x 7/8 inch x 12 inch length includes flow sensor
Hose (braided) assembly-Kitchen Sink 3/8” compression inlet x 1/2” faucet x 24” length includes flow sensor
Hose (braided) assembly-Kitchen Sink with dishwasher 3/8” compression inlet x 1/2” faucet TEE and flow sensor
Hose (braided) assembly-Kitchen Sink with existing TEE 3/8” compression inlet x 1/2” faucet includes flow sensor
Hose (braided) assembly-Kitchen Sink with dishwasher includes TEE and flow sensor and three Shark Bites
Shower assembly white escutcheon-1/2” male in the wall x 1/2” male shower nut includes flow sensor
Shower assembly chrome escutcheon-1/2” male in the wall x 1/2” male shower nut includes flow sensor
Hose assembly-Washing machine-hose bib inlet x hose bib outlet includes flow sensor
Hose (braided) assembly-1/2” Shark Bite to 9” length inlet x 12” length outlet to 1/2” Shark Bite includes flow sensor
Hose assembly-Falcon-1/2” Shark Bite to 2” length inlet x 12” length outlet to 1/2” Shark Bite includes flow sensor
Hose (braided) assembly-1/2” Shark Bite elbow to 9” length inlet x 12” outlet to 1/2” Shark Bite elbow includes flow sensor
Hose assembly-Falcon-1/2” Shark Bite elbow to 2” length inlet x 12” length outlet to 1/2” Shark Bite elbow inc flow sensor
Hose (braided) assembly-1/2” FIP to 9” length inlet x 12” length outlet to 1/2” FIP includes flow sensor
Hose assembly – Falcon 1/2” Push to Connect 16” length x 1/2” Push to Connect 16” length includes flow sensor
Hose (braided) assembly-Toilet extension 7/8” inlet x 3/8” compression 24” length includes flow sensor
** Consult factory for additional length assemblies