WM-1000C Cold Water Meter with Pulse Output Specifications
The H2O Degree WM-1000C is a flexible axis pulse equipped cold water meter that is compatible with the H2O Degree
wireless pulse counter.
These quiet and accurate meters fit inside challenging installation including between studs, under counters, along pipes and against walls.
Regardless of pipe angle, the meters are designed so that the measuring chamber can always be positioned horizontally for maximum performance and accuracy.
This meter provides leak detection for the entire apartment based on one pulse per gallon meter reads.
|Operating Capacity||20 gpm|
|Maximum Rate for Continuous Duty||15 gpm|
|Maximum Pressure Loss at Maximum Flow||10.9 psi|
|Normal Flow Rate (+/- 1.5%)||1-20 gpm|
|Minimum Flow (+/- 3%)||1/4 gpm|
|Maximum Working Pressure||150 psi|
|Meter Casing Spuds, Norminal||1"|
|Nominal Pipe Size||3/4"|
|Materials: Main Case||Glass-Reinforced Nylon|
|Materials: Measuring Chamber||Glass-Reinforced Nylon|
|Materials: Register||Glass Lens, stainless steel case|
AWWA Standard - Meets or exceeds all sections of Standard ANSI/AWWA C708, most recent revision for cold water multi-jet meters with AWWA bronze main cases. California Approved—CTEP # 5111b-12.
NSF/ANSI Standard 61 - Advanced polymer pressure vessel design is inherently free of any metallic compounds. Optional EnviroBrass unleaded main case available.
Design/Operation - The flow tube provides a straight run of pipe upstream and downstream of the measuring element, conditioning flow for maximum accuracy. Installation flexibility allows the measuring chamber to always be positioned horizontally for high accuracy and long-life operation. A precision engineered measurement chamber and measuring elements deliver virtually noise-free operation critical for inside-set meters.
Flow Tube - Polymer: Corrosion resistant lead-free construction consisting of proven tough, 40% glass- reinforced nylon rated polymer with burst resistance to 750 psi. Threaded and unthreaded meter coupling provides simple, effective installation options. EnviroBrass: Optional unleaded EnviroBrass Flow tubes are available.
Main Case - The flexible axis meter case is constructed of lead-free, Corrosion-resistant 50% glass-reinforced nylon.
Register Sealing - All Direct read and DIALOG® registers are IP-68 rated, permanently sealed with a scratch resistant glass lens, stainless steel base and wrap-around gasket to prevent intrusion of dirt or moisture.
Register Units - Registration available in either U.S. gallons, cubic feet or cubic meters.
Magnetic Drive - A reliable, direct magnetic drive provides linkage between measurement element and register. No intermediate gearing is required; no gearing is exposed to water.
Test Circle - Large center sweep hand with one hundred (100) clearly marked gradations on the periphery of the dial face.
Low Flow/Leak Indicator - ALL DIALOG and direct read registers have a center mounted indicator with high sensitivity resulting from direct one-to-one linkage to the measuring element.
Pressure Loss Curve
|WM1000C||Cold Water Meter 3/4 inch 20 gpm POLY 1 pulse/gallon (CA approved) includes couplings
|WMST075||3/4 inch x 5 inch Spacer tube - for use with WM1400 and WM1600 series meters|
|M54130||Line Powered Pulse Counter - Indoor (4 channels)|
|M54130-O||Line Powered Pulse Counter - Outdoor (4 channels)|
|M54230||Battery Powered Dry Contact Pulse Counter - Indoor (2 Channel)|
|M54232||Battery Powered Dry Contact Pulse Counter w/ Display indoor (2 Channels)|